1 947767
ISSUE 1
VIP-801A
NETWORK AUDIO PORT
INTRODUCTION
The VIP-801A Network Audio Port enables voice
access to a single zone of one-way paging over an
IP network, allowing page zones to be extended
anywhere network connectivity is available. The
VIP-801A can be programmed as a SIP (Session
Initiation Protocol) device for connectivity to virtually
any Voice over IP (VoIP) telephone system.
SPECIFICATIONS
Features
1 Audio Input
2 Audio Outputs
2 Form C Relays
1 Contact Closure Input
1 SIP identity for registering to a VoIP telephone
system
RJ-45 jack for network connection
Front panel activity LED
Provides audio for up to 40 Valcom one-way
amplified speaker assemblies
AUX audio input via RCA jack
Contact closure or VOX operation of audio input
Removable screw terminal connectors provided
for audio and relay interfaces
AUX input music mutes during page
Output control contact closure provided during
paging output
Compatible with 25 or 70 Volt amplifiers
Barrel jack for optional DC power
Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
1.38 H x 6.13" W x 5.25" D
(3.50cm H x 15.6cm W x 13.33cm D)
Weight: 1.25 lbs. (0.57 kg)
Nominal Specifications
Input Impedance:
600 Ohms
Input Level:
-10dBm nominal
Voice Switch Sensitivity:
-21dBm
AUX Input Impedance:
8 to 600 Ohms
AUX Input Level:
-10dBm nominal
Output Impedance:
50 Ohms
Output Level:
- 10dBm nominal
Relay Current:
1 Amp @ 24VDC
Nominal Power Requirements
Via rear panel barrel connector:
Voltage: 24VDC
Current:
325mA
Via 802.3af PoE Ethernet Switch:
802.3af:
Class 3
Environment
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
Packing List
Qty Item
1 VIP-801A
1 VSP
Document
2
Mounting Brackets W/ Hardware
4 Rubber
Pads
