Industrial Rivet & Fastener Co. RK-797 Series, Manual

Page: 8 / 32

4
2.6 Electrical Hazards
Warning!
Work on this tool is to be performed only by a qualified electrician. Inspect
the tool’s electrical components on a regular basis. Repair loose
connections and damaged cables immediately. Remove the battery before
performing tool repairs.
Note!
The tool must always be kept locked in a secure location.
2.7 Basic Safety Measures
Warning!
The terms “tool” and “power tool” used in the safety information refers
to tools powered from a wall outlet (with power cord) and battery –
powered tools (without a power cord).
1.
Keep your working area clean and well lighted.
A cluttered or poorly illuminated working area may result in accidents.
2. Do not operate the tool in areas which explosions can occur.
Where flammable liquids, gases, or dusts are located. Power tools produce
sparks that can ignite dust or vapors.
3. Pay attention to environmental conditions
Do not expose the tools to rain or water.
Do not use tools in a damp or wet environment.
4. Keep children and other persons away when using the tool.
Distractions may cause you to lose control of the tool.