Industrial Rivet & Fastener Co. RK-797 Series, Manual

Page: 19 / 32

15
4.3 Inserting The Battery
To attach the battery (1), align the battery tab with the groove in the housing such that
it slides easily into place.
Always attach the battery completely so that it locks into place with a click. If the
battery is not properly attached to the tool, it can become detached and cause
substantial damage.
Never use force when attaching the battery. If the battery does not slide into place, it is
not correctly aligned. In this case, remove the battery and guide it once again into the
grooves.
To remove the battery, press down the clip (2) on the front of the battery. The battery
can now easily be removed by sliding it forward out of the holder.
After the battery has been inserted, a green light will appear in the LED status display
if there is enough battery power to operate. Subsequently, the light will go off.
Press the start switch “trigger” (1)