Indmar 350 H.O. Operator'S Manual Download Page 76 | Manualshive

Page: 76 / 80

background image

Indmar Marine Engines

C-1

What Is Covered by Warranty

Any part(s) that fails as the result of defects in material and workmanship will be replaced at no charge to the customer under the
terms of the Limited Product Warranty.

What Is Not Covered by Warranty

•

Shop supplies used in performing warranty work (i.e. rags, sealants, lubricants, etc.).

•

Incidental and consequential damages (storage charges, telephone or rental charges of any type, inconvenience or loss of time
or income).

•

Minor adjustments and tune-ups; including checking, cleaning or adjusting spark plugs, carburetor setting, filters, belts, controls
and checking lubrication.

•

Water pump impellers, water hoses, cooling system anodes, or any component damaged from the failure of any of those items.

•

Failure caused by neglect, lack of maintenance, accident, abnormal operation, improper installation, improper preparation,
improper winterization, improper dealer set-up or improper service or normal wear and tear.

•

Haul-out, launch, towing charges; removal and/or replacement of boat partitions or material because of boat design for neces-
sary access to the Product.

•

Transportation charges and/or travel time.

•

Service requested by customer other than that necessary to satisfy the warranty obligation.

•

Use of other than Indmar replacement parts and labor to install these parts when making warranty repairs.

•

Oils, lubricants or fluids used in normal maintenance.

•

Participation in or preparing for racing or other competitive activity.

•

Starter motors and/or armatures or field coil assembly, which are damaged from excessive cranking, condensation, or submersion.

•

Water entering the engine via the intake or exhaust system or submersion.

Appendix – C

LIMITED WARRANTY

OM0502-04 Body 11/14/03 11:23 AM Page C-1

«
...
74
75
76
77
78
...
»

Summary of Contents for 350 H.O.

















































































Reviews:

No comments

Related manuals for 350 H.O.

Brand: O.S. engine Pages: 21

Brand: Waldbeck Pages: 72

Brand: Daspi Pages: 40

Brand: VEM Pages: 35

Brand: EBARA Pages: 36

Brand: Schartec Pages: 16

Brand: Wacker Neuson Pages: 114

Brand: Perkins Pages: 27

OMEGAFLEX FPU5-MT-110

Brand: Omega Engineering Pages: 83

Brand: MTU Pages: 156

PNEUTORQUE PT 1

Brand: norbar Pages: 11

Brand: YARDMAX Pages: 20

EQP III 300 Series

Brand: Toshiba Pages: 2

Brand: Toshiba Pages: 6

Brand: Toshiba Pages: 31

EQP Global IEC Series

Brand: Toshiba Pages: 34

Brand: Toshiba Pages: 286

Brand: Honda Pages: 139

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands