Indmar 350 H.O. Operator'S Manual Download Page 7 | Manualshive

Page: 7 / 80

background image

vi

Indmar Marine Engines

Send your completed warranty form today!

The Federal Boat Safety Act of 1971 requires registra-
tions of marine products sold in the United States be
maintained by the manufacturer and dealers of those
products. Your dealer should have completed your war-
ranty registration card to comply with federal regulations.
This registration enables us to contact you, if it should
become necessary, to change or improve your product.
The engine serial number is stamped into the block and
should also be on your warranty card. Always retain a
copy of the serial number for your personal records. If
your dealer did not fill out the card and give you a copy,
contact your dealer.

Warranty registration must be received within 10 days
after date of purchase by the first owner. If your engine is
not registered, all warranties may be void.

The remainder of the engine warranty is transferable to
the second or subsequent owner. Contact your dealer or
Indmar for details.

To obtain enjoyment from your boat, follow recommenda-
tions described in this manual. The knowledge you gain
through careful review will help you experience lasting
satisfaction.

Further information regarding the care, operation,
required equipment or specifications for your boat can be
obtained from your local US Coast Guard Auxiliary, US
Power Squadron, state boating authorities, or the
American Red Cross. Know the law and your responsibil-
ities as a boat owner.

Any alteration, change, improper maintenance or abnor-
mal use by you which renders the engine or any of its
components unreasonably dangerous will void all war-
ranties and Indmar will not be liable for the resulting
damages or injuries.

OM0502-04 Body 11/14/03 11:23 AM Page vi

«
...
5
6
7
8
9
...
»

Summary of Contents for 350 H.O.

















































































Reviews:

No comments

Related manuals for 350 H.O.

Brand: E-Z-GO Pages: 100

Brand: Perkins Pages: 88

MICROPUMP EagleDrive MS

Brand: Idex Pages: 23

Brand: Continental Motors Pages: 146

Brand: Keyde Pages: 4

Brand: Westerbeke Pages: 64

3T-MOTORS 3T45-10E

Brand: 3T-Components Pages: 12

3T-MOTORS 3T35-13

Brand: 3T-Components Pages: 24

3T-MOTORS 3T35-10SD

Brand: 3T-Components Pages: 16

3T-MOTORS 3T35-10R

Brand: 3T-Components Pages: 20

Brand: Craftsman Pages: 12

Brand: Craftsman Pages: 16

Brand: Craftsman Pages: 12

Brand: Craftsman Pages: 13

Brand: Craftsman Pages: 12

Brand: Craftsman Pages: 12

Brand: Craftsman Pages: 12

Brand: Craftsman Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands