background image

Indmar Marine Engines

xiii

Owner’s Warranty Responsibilities

As the inboard engine owner, you are responsible for the
performance of the required maintenance listed in your
owner’s manual. Indmar Products recommends that you
retain all receipts covering maintenance on your inboard
engine, but Indmar Products cannot deny warranty solely
for the lack of receipts or your failure to ensure the per-
formance of all scheduled maintenance.

As the inboard engine owner, you should be aware that
Indmar Products may deny you warranty coverage if your
inboard engine or part has failed due to abuse, neglect,
improper maintenance or unapproved modifications.

You are responsible for presenting your inboard engine
to an Indmar Products distribution center as soon as a
problem exists. The warranty repairs will be completed in
a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights
and responsibilities, you should contact the Indmar
Director of Customer Service at 1-901-353-9930.

OM0502-04 Body  11/14/03  11:23 AM  Page xiii

Summary of Contents for 350 H.O.

















































































Reviews: