Removing product from crane tip and rotator
1. Place the rotator on a flat surface.
2. Tie a rope or similar around the product and fix it up on the machine's point, or other high
location, so that the product cannot fall when the crane tip is loosened.
Caution
A
Risk of crushing injuries. Check that the product cannot fall before it is
loosened from the crane tip.
3. Remove the upper pin so that the product is loosened from the crane tip.
4. Remove the upper pin so that the product is loosened from the rotator.
5. Remove the product.
20
© Indexator AB
1102 029
2017-08-21 13:36
