background image

Introduction

Introduction

This manual is intended for installation engineers, maintenance personnel or users of the
product.
As installation and maintenance personnel or the end user, it is presumed that you have
basic knowledge of mechanics and hydraulics.
Read through the manual carefully and ensure that you understand its content prior to
installing, repairing or using the product.

Installation and maintenance may only be performed by authorised personnel.

Storage and distribution of the manual

The manual is part of the product and should always be kept in an easily-accessible place,
for example, in the driver's cab. Replace any lost manuals immediately.

Guarantee and claims

Contact your dealer.

Indexator AB cannot be held responsible for unauthorised repairs and/or modifications
made to the product.

Other information

The information in this manual was correct at the time of going to print. No liability is
accepted for any errors or omissions in this manual. Every effort has been made to ensure
that the content is accurate and complete.

Indexator AB reserves the right to make technical improvements and modifications to the
product as part of further development, and without changing the product's basic functions.
These improvements and modifications do not necessarily mean that the manual will need
updating. Contact your local dealer for information about any changes.
Copying this manual in whole or in part is not allowed without written authorisation from
Indexator AB. The restriction applies to all forms of copying, including printing, digitising, etc.

1102 029

2017-08-21 13:36

© Indexator AB

3

Summary of Contents for LINK S-184 HD

























Reviews: