System1000_GB_130705.doc
Page
4
-
Pets may also trigger an alarm. When the system is armed, keep pets out of areas protected by PIR
sensors. If this is not possible, install the PIR upside down so that there is an area beneath the rays
left for the pet. In this case it is neccessary to check the detection range especially thoroughly.
-
How quick a movement is detected depends also on the ambient temperature. A movement can be
detected more quickly in a cold environment.
-
Movements that are at right angles to the PIR are detected more quickly than movements towards
the PIR. Install the PIRs in positions where a burglar would pass the PIR at right angles.
8. Accessories
The kit contains two PIRs and a wirefree remote keyfob. The system can easily be expanded by adding
additional PIRs. Additional keyfobs are also available. You can protect doors and windows with the door
contacts available as accessories. Accessory components must be adjusted to the codes of the original
system before use. This system will not work with wirefree accessories from other wirefree alarm systems
(see section 19 and 21).
9. Coding
For your security, each system is factory preset to an individual code. On the keyfob and PIRs are labels
with a row of numbers comprising of “0” and “1”. It is important that all the components have the same
identical row of numbers.This number is called the house code.
Please note your house code here:
Should you wish to expand your alarm system, you need this house code. If the numbers on the
components are not identical, please ask your supplier.
fig. 3
