- Check and clean the INDEX tool magazine for 6 tools
Orientation
Tool magazine for 6 tools 1
1
Tool magazine
2
Tool mounting
3
Clamping spring
4
Cleaning nozzles
This maintenance activity is merely a visual inspection. As part of the visual
inspection, the general condition of each element, the tool mounting (2), clamping
spring (3), and the radial fixation (x), must be assessed. Through a series of
cleaning nozzles (4), the change area is freed automatically from coarse dirt such as
chips when changing the tool. A random visual inspection of these cleaning nozzles
for damage must also be made. Should the visual inspection reveal any
imperfections or defects, they must be eliminated promptly. Defect that are not
eliminated may result in further damage to the tool mounting on the milling spindle or
even total failure of the milling spindle.
Tool magazine for 6 tools 2
2
Tool mounting
3
Clamping spring
c
Radial fixation
x
HSK-A40 tool
Maintenance Summary - Care activities
32
Maintenance Instructions
G200.2
DIE078EN - 05.06.2019
