Index G200.2 Maintenance Instruction Download Page 24

Page: 24 / 110

A090

- Check electrical lines (visual inspection)

Orientation

Leave the immediate area around the machine and the additional

units free; do not use it as storage or warehouse space. This

significantly reduces the risk of damage to electrical lines.

Electrical lines routed outside the machine (e.g., lines for cooling lubricant systems,

chip conveyor, and pedal switch) must be regularly checked for damage (e.g.,

pinching or cuts).

Procedure

Warning

Damaged electrical lines.
Electric shock.

Switch off machine and accessory units and arrange for

immediate replacement of damaged lines by an electrically

trained technician.

Check electrical lines to chip conveyor.

2. Check electrical lines to cooling lubricant system.

3. Check electrical lines to workpiece feeder.

4. Check electrical lines to workpiece discharge unit.

5. Electrical leads for the pedal switches.

6. Check electrical lines of the working area light.

7. Check electrical line to sub-panel / hand-held control unit (option).

8. Check electrical lines to other optional attachments.

Maintenance Summary - Care activities

Maintenance Instructions

G200.2

DIE078EN - 05.06.2019

Summary of Contents for G200.2















































































































Search results

Summary of Contents for G200.2

Reviews:

Related manuals for G200.2

Brands by name

Popular brands

Index G200.2, Maintenance Instruction

Search results

Summary of Contents for G200.2

Reviews:

Related manuals for G200.2

Brands by name

Popular brands