![background image](http://html.mh-extra.com/html/indesit/tcud93b/tcud93b_service-information_2052081015.webp)
15 of 37
Indesit
Company
Service Manual UK
English
A8 Programme Progress Display
The second line of the display shows the status of the programme as it progresses:
(long messages scroll across the line).
Warnings
The second line of the display also gives warnings and
reminders:
(Reminders occur at the end of the programme):
PRE CARE
(if option Pre Care
available & selected)
DRY
COOL TUMBLE
END OF CYCLE, POST CARE
PHASE
(if option Post Care
available and selected)
END OF CYCLE, EMPTY THE
WATER BOTTLE
END OF CYCLE, EMPTY THE WATER BOTTLE
Reminder that the water container should be
emptied every time you use the dryer.
EMPTY WATER BOTTLE
Indicates that the water container is full. The message
will take a few seconds to go out after replacing the
empty water container; the dryer must be running for
this to happen
Note:
If the water container fills and
this message is displayed, the heat is turned off
and your clothes will not dry.
CLEAN CONDENSER
This message indicates that you must clean the
Condenser unit and will occur at intervals
depending how much you have used the dryer.
When you finish the next programme the
message is cancelled.
Note:
The Clean Condenser warning is displayed
after every 10 cycles counted by the module. This
warning is only visible for one cycle and is cleared
after completion of that cycle.
The warning display is only a reminder and is not
connected to any sensing device - it does not
indicate the condition of the condenser.
CLEAN FILTER
Reminds you to clean the Filter every time you
use the dryer