35 of 37
Indesit
Company
Service Manual UK
English
J. Door Switch
1. Remove the top cover as in (A).
2. Remove the console as in (C).
3. Depress the locking tab securing the switch to the front panel and remove the switch.
K. Rear Bearing (Tear Drop shaped)
L. Pump & Float Switch
1. Release the two pump/float assembly cover clips. See Photos 1 and 2.
2. Release the two clips at either end of the pump/float assembly and lift the unit clear.
1.
Remove the rear bearing cover.
2.
Remove the drive pin and collar.
3.
Remove the tear drop bearing fixing
screw.
4.
Slide the bearing off the drum shaft.
Teardrop Bearing
fixing Screw
Photo 1
Photo 2
Released Clips
Photo 3
Shown with cover removed