Indesit tcud93b, Service Information

Page: 33 / 37

33 of 37
Indesit Company
Service Manual UK English
DISMANTLING INSTRUCTIONS
SAFETY NOTES
1. ENSURE THAT THE MACHINE IS UNPLUGGED BEFORE DISMANTLING.
2. BEWARE OF SHARP EDGES ON METAL PANELS AND PRESSED PARTS.
A. Top Cover
1. Remove the 2 screws securing the top cover to the back panel.
2.
Slide the top cover back, it may be necessary to use a small screwdriver behind the lid fixing.
3. Lift at the rear, slide back and lift clear.
B. Side Panels
1. Remove the top cover.
2. Remove the 3 screws securing the side panel to the rear panel.
3. Pull the side panel backward to disengage from the lugs on the base panel.
NOTE: - Different length screws are used to secure the side panels. Take note of the screw
positions when removing the side panel.
C. Console Panel
1. Remove the top cover as in (A).
2. Remove the water container.
3. Remove the 2 screws on the left hand side of the console securing the water container housing
to the console.
4. Remove the 2 screws securing the console to the side panels.
5. Release the console securing lugs to the front panel.
6. Pull the console clear of the front panel.
Note: When refitting, check the clips along the bottom edge of the console and correctly
positioned onto the front panel.
D. Interface Module & Option Buttons
1. Remove the top cover as in (A).
2. Remove the console as in (C).
3. Disconnect the plugs to the interface module.
4. Unclip the interface module from the console.
5. The light guides and option buttons can now be unclipped from the console.
E. Control Module
1. Remove the plinth by pulling forward.
2. Remove the top cover.
3. Remove the right hand side panel.
4. Disconnect the wiring noting connections.
5. Remove the screws securing the module to the kickstrip.
Note: - The control module can be programmed with the relevant eeprom file if the control
module is replaced, the eeprom file becomes corrupted or if an updated file becomes available.