Man-1078_Sigma_CP_AUS_12
Page 17 of 29
Configuration options are simple to enter using the codes in Table 8below. When the control panel is at
access level 3, the sub-text of the
Mode
and
Select
buttons is used to enter a number using tens (+10) and
units (+1).
When the required code number is displayed, pressing the
Enter
button will cause the dot on the units,
seven-segment display to flash. This indicates that a configuration option has been set.
To review which configuration options have been set previously, simply scroll through numbers 1 to 99, A1
to A8, C1 to C8 and E1 to E8 and those with a flashing dot indicate which options have been set.
DOT
FLASHING
NO DOT
ZONE 1 I.S. BARRIER
OPTION SET
ZONE 1 I.S. BARRIER
OPTION NOT SET
Figure 9 – Example display showing option set and not set.
