EK-WL8-TRH/AU
WIRELESS TRANSLATOR
MODULE
STFV.425551.070-AU-UM rev. 4
20.08.2020
Page 14 of 22
CHOOSING PROTOCOL TYPE
Configuration
Maintenance
Start Addr
Loop
PSW Change
WL8-TRH
v x.x/RF v.y
A7
Short!
Radio
RSM-WTM
HWL8-TRH
Prot.type
Currently you have to use default protocol type named RSM-WTM. The pro-
tocol type HWL8-TRH is for future use.
ADD/DEL CHILD DEVICES
The following steps describe the common procedures for adding or deleting
the devices from the wireless system.
1.
The ADD command procedure is performed in this way:
WL8-OH
WL8-O
WL8-H
WL8-OS
WL8-OV
WL8-HS
WL8-SND
WL8-CP
WL8-OUT
WL8-EXP
Press prog
button
…
Device
added
successfully
Configuration
Maintenance
Radio
Start Addr
Loop
000wl8-trh
Se
le
ct
001wl8-trh(e)
002wl8-os
etc.
Password
WL8-TRH
v x.x/RF v.y
A1
--ADD NEW--
WL8-B
WL8-V
WL8-IN
WL8-N
WL8-EXPN
WL8-TRH
Press Prog.
button in devicce
After the ADD command is performed, the translator waits for the installer to
link a child device by pressing the child device's "program button" (see the
specific installation manuals of these devices).
After a device is linked the translator automatically assigns a subsequent
address to it. The whole sequence starts from the address assigned to the
translator ("Start Addr" menu option).
2. The following picture describes the DEL ("delete") command procedure,
which can be applied to devices that are already present in the wireless
configuration:
Summary of Contents for ekho EK-WL8-AU
Page 1: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 1 of 22 ...
Page 6: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 6 of 22 ...
Page 22: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 22 of 22 ...
