EK-WL8-TRH/AU
WIRELESS TRANSLATOR
MODULE
STFV.425551.070-AU-UM rev. 4
20.08.2020
Page 19 of 22
MAINTENANCE
Maintenance menu (not for WL8-TRH(E)) allows you to see the state of
wireless devices and send control commands:
Configuration
! 001wl8-o
! 003wl8-in
State
Control
Tamper
Leds OFF
Green ON
Wink
Test
Generate
alarm ?
Yes
RFLink Qual
Maintenance
WL8-TRH
v x.x/RF v.y
A1
! 001wl8-trh(e)
RF Link
Command
successfully
sended
S/N
43 dB
Excellent
"
!
" at the beginning of the line means that there are some problems with the
child device. By using the "State" menu, a user can obtain information about
the general state (alarm/no alarm) and all current faults of the device. Use
the "UP" and "DOWN" buttons to scroll through the faults list.
NOTE
After battery replacement in a child device wait at least 5 minutes for
any unexpected fault messages to disappear.
By using the "Control" menu you can switch on and off the LEDs, activate
the "RF link Quality" mode. For detectors, it's also possible to generate an
alarm to test the system.
In the "RF link Quality" mode, child devices indicate the signal strength with
the parent wireless expander by blinking the LED:
-
2 blink RED
– no connection
-
1 blink RED
– poor signal strength
-
1 blink GREEN
– good signal strength
-
2 blink GREEN
– great signal strength
Devices automatically exit the "RF Link Quality" mode in 15 minutes.
Summary of Contents for ekho EK-WL8-AU
Page 1: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 1 of 22 ...
Page 6: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 6 of 22 ...
Page 22: ...EK WL8 TRH AU WIRELESS TRANSLATOR MODULE STFV 425551 070 AU UM rev 4 20 08 2020 Page 22 of 22 ...
