Incite Fire ekho EK-WL8-AU, Manual

Page: 15 / 22

EK-WL8-TRH/AU
WIRELESS TRANSLATOR
MODULE
STFV.425551.070-AU-UM rev. 4
20.08.2020 Page 15 of 22
Configuration
Maintenance
Radio
Start Addr
Loop
--ADD NEW--
000 RR-V
Delete
Init
Info
Are you
sure?
Yes
Se
le
ct
001 Aur-TS
002wl8-os
etc.
WL8-TRH
v x.x/RF v.y
A1
Password
Please keep in mind that this command deletes a device from the configura-
tion of the translator, but not from the configuration of the main control panel.
CHANGING THE START ADDRESS OF DEVICES IN THE LOOP
WL8-TRH
v x.x/RF v.y
A1 Short!
Start
adress
Current
isolator state
Upper display menu
If the signal line has previously connected devices (for example, addresses
1 to 19 are occupied), you must change the start address (available from 1
to 127) to connect the following (wireless) devices:
Apply
new addr?
Yes
Configuration
Maintenance
Radio
Start Addr
Loop
Start addr.
D
O
W
N
U
P
20
WL8-TRH
v x.x/RF v.y
A1
WL8-TRH
v x.x/RF v.y
A20
Press
Esc
WL8-TRH(E)
v x.x/RF v.y
A2
WL8-TRH(E)
v x.x/RF v.y
A20
You can check correctness of address changing
wl8-trh
Radio addr.
000
Configuration
Maintenance
Radio
Loop
Start Adrr
020 POM
WL8-TRH
v x.x/RF v.y
A20