Incite Fire ekho EK-WL8-AU, Manual

Page: 13 / 22

EK-WL8-TRH/AU
WIRELESS TRANSLATOR
MODULE
STFV.425551.070-AU-UM rev. 4
20.08.2020 Page 13 of 22
NEW SYSTEM CREATING
First of all, you should create central node (Main TRH) or a few central
nodes if it's required of application.
WL8-TRH
v x.x/RF v.y
A1
Yes
Create new
system?
Main TRH
TRH as Exp
WL8-TRH
v x.x/RF v.y
A1
Don't forget to change address in a loop.
After that you can add another TRH as expander to the current radio sys-
tem.
STEP1
– add TRH as expander to Main TRH configuration
Configuration
Maintenance
Password
Radio
Start Addr
Loop
001 wl8-trh(e)
etc.
--ADD NEW--
000 wl8-trh
002 wl8-os
WL8-EXPN
WL8-TRH
WL8-N
Press prog.
button
...
MAIN TRH
WL8-TRH
v x.x/RF v.y
A1
STEP2- initialize TRH as expander in radio system
WL8-TRH
v x.x/RF v.y
A1
Yes
Create new
system?
TRH as Exp
Main TRH
Initialization
is in progress
…
WL8-TRH(E)
v x.x/RF v.y
A1
TRH as expander
Waiting few
seconds
STEP3
– make sure the next message appears on Main TRH display
Device
added
successfully
MAIN TRH
STEP4
– change loop address for TRH as expander by its menus