inbody BPBIO250, User Manual

Page: 38 / 56

38
Setting F02 Screen Setting standby time
∙ Press and hold [▼] or [▲] button to quickly change the setting.
∙ Standby time can be set from 1, 2, 5, 10, 20 and 30 minutes.
Note
(3) F02: Setting Standby Time
- The standby time between the repeated measurements can be set in the CYCLE (RANGE,
HIDE) Mode.
<Measurement Order>
❶
Press and hold the [MODE] button for 3 seconds to enter the user settings mode screen.
❷
Press the [▼] or [▲] button to set .
❸
Press the [START/STOP] button to enter the standby time setting.
❹
Press the [▼] or [▲] button to select the standby time.
❺
When the selection is completed, press the [START/STOP] button to complete the setting.
❻
After setting is completed, press and hold the [MODE] button for 3 seconds, and
return to the previous screen