inbody BPBIO250, User Manual

Page: 30 / 56

30
* CYCLE RANGE Mode
- In the CYCLE RANGE Mode, the patient can measure his / her blood pressure repeatedly
by utilizing the RANGE function.
(RANGE function notifies the user when the measured value is out of the average
measurement range.)
- The previous measurement result can be checked after the measurement is completed.
- The RANGE function allows the user to set the expected measurement range of systolic
and diastolic blood pressure, respectively.
- When the systolic blood pressure range is set from 160 to 180 mmHg and the diastolic
blood pressure range is set from 100 to 130 mmHg, CYCLE RANGE mode operates to measure
if the blood pressure is out of those ranges.
<Measurement Order>
❶
Make sure that the cuff is correctly worn and the measurement posture is correct again.
❷
Set to CYCLE mode by pressing the [MODE] button.
❸
Press the [START/STOP] button of the blood pressure monitor to start the blood
pressure measurement.
❹
When pressurization starts and the pressure reaches to a certain level, the measurement
begins while air is exhausting slowly.
❺
When the measurement is completed, the blood pressure is displayed on the screen
and is automatically saved.
❻
The current number of measurements is changed.
❼
After the standby time has elapsed, the next blood pressure measurement starts.
[Measurement-standby screen]
Show Current Pressure Show Systolic Pressure
RANGE Set Value
(160-180)
Show Diastolic Pressure
RANGE Set Value
(100-130)