inbody BPBIO250, User Manual

Page: 37 / 56

37
F01 Screen Setting Setting Repeat Count
∙ By pressing the the [▼] or [▲] buttons, you can access the settings directly.
∙ The number of measurements can be set from 1 to 6 times.
Note
(2) F01: Setting Number of Repeated Counts
- The number of repeated measurements can be set in the CYCLE (RANGE, HIDE) mode.
<Measurement Order>
❶
Press and hold the [MODE] button for 3 seconds to enter the User Setting Mode.
❷
Press the [▼] or [▲] button to set .
❸
Press the [START/STOP] button to switch to the repeat count setting.
❹
Press the [▼] or [▲] button to select the number of measurements.
❺
When the selection is completed, press the [START/STOP] button to complete the settings.
❻
After the setting is completed, press and hold the [MODE] button for 3 seconds,
and return to the previous screen