inbody BPBIO210, User Manual

Page: 16 / 40

16
(8) Completing the Measurement
❶
When the blood pressure measurement is completed, open the exhaust valve and exhaust
the air compressed in the Cuff completely.
❷
When the pressure drops below 20mmHg, the pulse rate will be displayed in the
Pressure / Pulse Rate Display on the screen.
The pulse rate is measured when the pressure is reduced at a rate of 2 to 4 mmHg/sec.
If the pulse is not detected or unstable, ‘- - -’ is displayed on the screen.
* Please review ‘B. Measurement related - Pulse rate has not been measured’ on page 56.
(9) Turning the Power Off
❶
Press the Button to switch off the power.
(7) Depressurization
❶
Rotate the exhaust valve counterclockwise to open the valve. Proceed with blood pressure
measurement at a proper exhaust rate.
❷
If the button on the main body is pressed at a certain pressure value, the pressure
marking will be displayed accordingly.
* The marking can be displayed up to 5 times. When marking more than 5 times, the marking is erased consecutively.
MARK button
Exhaust valve closed Exhaust valve open