inbody BPBIO210, User Manual

Page: 12 / 40

12
D. Features and Functions
(1) Automatic Power Off
• Main Unit will switch off automatically if idle for more than 2 minutes to prevent
battery drain.
• Main Unit will not switch off if connected to the AC Adapter.
(2) Protection from Excessive Pressurization
• If the pressure of the Cuff is pressurized above 320mmHg, it will automatically and
forcedly exhaust the pressure to protect the patient.
(3) Residual Air Detection
• When the power is switched on, 'E1' error code will be displayed on the screen when any
residual air in the cuff is detected.
• Make sure to exhaust all the air in the Cuff before switching on to obtain accurate
measurement.
(4) Heart Rate Measurement
• Measurement of the pulse is conducted when the pressure is over 50mmHg. Heart Rate
is checked only when the pulse is detected more than 5 times.
• When the decompressing is performed too quickly, the heart rate may not be checked.
Decompress at the rate of 2~4mmHg/sec. to detect the pulse.
• The measured pulse is displayed when the pressure decreases to less than 20 mmHg.
• The measured heart rate will be displayed when the pressure is less than 20mmHg.,
“- - -” will be displayed.
(5) Backlight
• The backlight turns on or off automatically depending on the brightness of the surroundings.
• The backlight can be manually operated with the Backlight Button.
• If the backlight is operated manually with the backlight button, the backlight will not turn
on or off automatically. When the product is turned off and on, the backlight automatically
turns on or off again depending on the brightness of the surrounding environment.
(6) MARK
• MARK function allows to display the measured value on the screen momentarily once the
[MARK] button is pressed.
• Up to five marks can be displayed.