inbody BPBIO210, User Manual

Page: 22 / 40

22
(2) Connecting Cuff and Air Bulb Unit
1. Plug the Cuff Tube into the Cuff Tube Connection of the Main Unit ( ).
2. Plug the Controller 4-Pole Plug Connector and Controller Tube into the Connector ( )
of the Main Unit.
3. Plug the Controller 4-Pole Connector and the Controller Tube all the way to the end.
• Use AA sized Alkaline or Manganese batteries.
• Do not mix new and used batteries. Replace all four AA batteries at once when replacing.
• Do not insert batteries with wet hands.
• Make sure that the polarities (+) and (-) are correct.
Warning
(3) Inserting / Replacing Batteries
1. Remove the Battery Cover.
2. Insert four AA sized batteries in the correct direction as indicated below.
3. Close the Battery Cover