SmartNode Installation
51
10.9 Planning Your Installation
Before you start the actual installation, it is strongly recommended that you gather all the
information needed to install and setup the device. See Table 1 below for an example of what pre-
installment checks you might need to carry out. Having carried out the pre-installation checks
enables you to install and set up your SmartNode 1000 or 2000 series into an existing IP or an ISDN
infrastructure with confidence.
When setting up your SmartNode consider cable length limitations, and potential electromagnetic
interference (EMI) as defined by the applicable local and international regulations. Ensure that your
site is properly prepared before beginning installation.
10.10 Installation Checklist
The Installation Checklist in Table 10-1 overleaf lists the tasks for installing a SmartNode 1000 or
2000 series. Make a copy of this checklist and mark the entries as you complete each task. For each
SmartNode 1000 or 2000 series, include a copy of the completed checklist in your Site Log.
Hardware Installation Guide, Revision 3.11
Summary of Contents for SmartNode 1000 Series
Page 2: ......
