![background image](http://html.mh-extra.com/html/ims/17/17_operating-instructions-manual_2049859055.webp)
53
MNEMONIC
FUNCTION
TYPE
O T
Set Ouputs 1-4 As 1 Value
I/O Variable
DESCRIPTION
The OT variable allows the user to set Outputs 1-4 as one 4 bit binary value. The value is entered in decimal, with a range of 0-15
and will display in binary where Output 1 will be the LSB and Output 4 will be the MSB.
Example: OT=12
Output 4 = 1
Output 3 = 1
Output 2 = 0
Output 1 = 0
USAGE
OT=<0-15>
PR OT
EXAMPLE:
OT=7
‘Set outputs 1-4 to O1=1, O2=1, O3=1, O4=0
RELATED COMMANDS: I1-I4, S1-S4
MNEMONIC
FUNCTION
TYPE
P
Set/Print Position Counter
Instruction
DESCRIPTION
This instruction is used to set or print the value of the MDrive Motion Control position counter. The position will read in Motor
Counts from C1 (Counter 1) by default, if encoder functions are enabled, the position counter will read in Encoder Counts from C2
(Counter 2).
The main difference in the relationship of the two counters is that where C1 is variable, the value of each count in terms of distance
moved is based upon the MS, or microstep resolution setting, C2 will always be 2048 counts per motor revolution, regardless of the
microstep resolution setting.
Modifying P in essence changes the frame of reference for the axis. P will probably be set once during system set up to reference or
“home” the system.
USAGE
UNITS
RANGE
P <±position>
Steps
-2147483648 to 2147483647
PR P
EXAMPLE:
P=0
‘Clear position counter, set to 0
PR P
‘Print the state of the position counter
RELATED COMMANDS: C1, C2
Summary of Contents for 17
