PAGE 14
2
If using the threshold strip, there are 2 types
available
A -Aluminium
&
B - Plastic
.
Optional threshold strips
A
Aluminium
B
Plastic
OPTION 5 -
SINGLE PANEL WITH 2 RETURN PANELS
a:
Temporarily,
position both corner joints (short side
*
as shown) onto the main panel.
b:
Carefully
measure the panel between the corner joints =
‘X’.
c:
Carefully trim your chosen threshold strip to length
‘X’
.
Remove the corner joints from the panel.
X
*
1
Plan the position of the main panel, the maximum distance the
main panel can be from the wall is 1180mm.
Mark the position of the
inner face
of the panel onto the floor.
Ensure the line is parallel to the wall.
If not using the optional threshold strips,
proceed straight to step 3.
1180mm
max.
=
1180mm
max.
=
Wall
X
a
b
c
Inner face of
main panel
4
a:
Ensure that the panel is vertical and the panel is parallel with the opposite wall. Carefully measure the distance
‘X’
between the glass panel and the wall.
b:
If required, trim the tie bars to length:
X - 50mm
.
c:
Assemble the tie bars:
slide on the top panel brackets and tie bar brackets. Lightly tighten the fitted grub screws.
X
Wall
Opening
=
=
X - 50mm
a
b
c
3
Carefully
place the panel (the correct way around) up
against the line marked on the floor and
support the
panel.
IMPORTANT
Ensure Glass Guard
H2o label is to the
outside of enclosure/
panel. Satin glass
patterns MUST be
installed to the outside
of the enclosure.
Note:
The Glass
Guard coating is on
the opposite side to
the label or satin glass
patterns.
A:
Aluminium threshold strip
- Position the strip up against the line marked on the floor.
Run a bead of silicone sealant down the length of the threshold strip. Place the panel (the
correct way around) into the threshold strip. Wipe off any excess silicone.
B:
Plastic threshold strip
- Position the strip centrally onto the bottom of the panel, position
the panel and strip up against the line marked on the floor (the correct way around).
A
Aluminium
B
Plastic
Optional threshold strips
Sealant
A
Tie bars
PN10786
Corner joint
PN10754
Corner joint PN11011
3mm
2mm
PN80499