Impex IRON GRIP STRENGTH TSA-9900, Owner'S Manual

Page: 28 / 33

STEP 16 (See Diagram 16)
A.) Attach the 216” Leg Press Cable (#40) to the bracket on the back of Leg Press Frame (#25).
Secure it with one M10 x 1” Allen Bolt (#94), two Ø ¾” Washers (#109), and one M10 Aircraft
Nut (#106). Draw the Cable to the open bracket on the Left Seat Support (#11). Install a
Pulley to the bracket. Draw the Cable around the Pulley then back to the open bracket on the
Leg Press Frame. Install another Pulley.
B.) Draw the Cable around the Pulley then through the opening on the Left Seat Support (#11)
and Left Vertical Frame (#6) to the open bracket on the Left Base Frame (#2). Install a Pulley
to the bracket.
C.) Draw the Cable underneath the Pulley then upward to the open bracket on the Vertical Press
Base (#23). Install a Pulley.
D.) Draw the Cable around the Pulley then downward to the open bracket on the Power Station
Base Frame (#3). Install a Pulley to the bracket.
E.) Draw the Cable around the Pulley then upward to the Angled Floating Pulley Bracket installed
in Step-15. Secure it with one M10 x 1” Allen Bolt (#94), two Ø ¾” Washers (#109), and one
M10 Aircraft Nut (#106).
27