CAMERAS FRAME GRABBERS IMAGING SOLUTIONS
BOBCAT Hardware User’s Manual
IMPERX
Rev. 2.0.7
6421 Congress Ave.
4/8/2014
Boca Raton, FL 33487
www.imperx.com
+1 (561) 989-0006
227 of 329
This register sets the actual line time in pixels.
Address
:
0x0554
Data (12:0)
:
<value> – actual line time in pixels.
Data (31:13)
:
N/A
4.3.6.5
Programmable Frame Time Enable
This register enables a programmable frame time mode. The user can extend the
camera frame time beyond the camera free-running frame time up to ~ 16 seconds.
This is also known as long integration.
Address
:
0x0550
Data (0)
:
0 – disable programmable frame time.
1 – enable programmable frame time
Data (31:1)
:
N/A
4.3.6.6
Programmable Frame Time Absolute
This register sets the actual frame time in microseconds.
Address
:
0x0558
Data (23:0)
:
<value> – actual frame time in micro seconds.
Data (31:24)
:
N/A
4.3.6.7
Camera Speed Selection
This register sets the camera speed. Two modes are available – normal and fast (over-
clocked). The free-running frame rate increases in fast mode.
Address
:
0x0608
Data (0)
:
0 – normal speed.
1 – fast speed.
Data (31:1)
:
N/A
4.3.7 AEC, AGC, AIC Workspace Registers
4.3.7.1
Auto Exposure Control (AEC)
This register enables the auto exposure control.
Address
:
0x0150
Data (0)
:
0 – disable auto exposure control
1 – enable auto exposure control
Data (31:1)
:
N/A
4.3.7.2
Maximum Exposure Time Limit
