Impacts STREAMER S320RD, Operating Manual

Page: 5 / 68

Operating Manual S320RD
3
1.3 Operative Range and Correct Usage
The blast machine is designed to be used on clean, dry, horizontal surfaces without any
obstacles. The machine cannot be used for any other purpose. The manufacturer will
not be held liable for damages resulting from incorrect usage. In cases of wrong usage,
the user will assume all risks and damages.
1.4 Advice for L.P. (Propane) Gas Mode
Settings or repairs of the L.P. Gas system must only be performed by a specialist. If
there is any gas smell or leak, the Blastmachine must be taken out of operation at once
and the tank shut-off valve must be closed. The Blastmachine must only be taken in
operation again after the cause has been found and removed by a specialist.
L.P. Gas system components, specifically gas lines, must not come into contact with
sharp-edged, hot or rotating parts. Lines must not be bent. The Blastmachine must be
inspected every day, specifically for tightness and tight seat of the gas components.
1.5 Advice for Operators of the Blast Machine
During the operation of the machine, it may be possible to exceed the acceptable noise
levels of 85 dB(A). This is dependent on various locations and circumstances. When the
noise level is 85 dB(A) or more, the machine operator and the persons working near the
machine must wear sound-insulating devices.
1.6 Machine Type Designation
Machine Type: S320RD
Unit / Designation: IMPACTS Blast Machine
Working Width: 12.6 in. | 320 mm
Drive: Progressively adjustable 1-98 ft/min | 0-30 m/min
Blasting Capacity: Up to 2,153 SF/hr | 200 m²/h
Abrasive Consumption: 100-200 g/m²