Impacts STREAMER S320RD, Operating Manual

Page: 23 / 68

Operating Manual S320RD
21
4.3 Transport of the Machine by Vehicle
When transporting the machine with vehicles, use straps to tighten the machine to the cabin of the
vehicle. This is critical to avoid damage to the machine or harm to any personnel. Use at least two
straps, or tighten the machine with one strap to the cabin wall of the vehicle. Make sure that all
parts of the machine are secured.
4.4 Operation Conditions
Check the surface before treatment for loose parts (stones, screws, etc.). The surface must be
swept if necessary. Make sure that the machine can travel over all inequalities on the surface.
Smaller inequalities, like weld seams or floor joints, will not effect the performance of the machine.
4.5 Assembly
The machine must be operated in accordance with instructions given in Chapter 5 ”Initial operation.“
Whenever the machine is not used for blast cleaning, the abrasive valve must always
be closed!
4.6 Dimensions
Main dimensions and unit specifications of the machine are shown in Chapter 1 "Technical Data.“