15
Mounting on a Light Stand
The Cruiser TTL-500 features a 5/8-inch baby receiver. If your light stand or
mounting plate does not have a 5/8-inch post, make sure to use the appropriate
adapter to mount the Cruiser.
1.
Set the 5/8-inch baby receiver onto your light stand's mounting pin, and
tighten the locking screw until secure.
2.
Adjust the angle, and then secure it with the tilt lock.
Attaching the Reflector
The Cruiser is equipped with a S-Mount to let you add light modifiers like the
included reflector, as well as softboxes and other light-shaping attachments.
1.
Remove the protective cap by pulling back the accessory release button
and turning the cap counterclockwise.
2.
To attach the reflector, align the three studs on
the reflector with the three mounting slots on the
flash head.
3.
Press the reflector in, and turn clockwise until
the reflector clicks into place.
Preparing for Use
