8
1. Group buttons
Press to select group A, B, or C.
The selected group is outlined.
Press and hold to enable or
disable a group.
2. Mode button
Selects Manual or TTL mode.
3. Sync button
(Canon and Sony)
Selects first-curtain sync,
second-curtain sync.
Go to our website
impactstudiolighting.com for
information on the Cruiser’s
compatibility with Sony cameras.
4. Plus (+) and minus (-) buttons
Raise and lower the output
power of the selected channel.
Press to change power in
increments of 1/10-stop.
Press and hold to rapidly scroll
through the power range.
In TTL mode, press to adjust EV
compensation.
5. Power LED
Indicates when power is on.
6. Power button
7. Channel button
Selects channels 1 to 8.
8. Test button
Fires a test flash.
9. Modeling light button
Turns the modeling light on and
off for the selected group, and
selects between 100% and 50%
brightness.
The modeling light can be set
independently for each group.
10. Sound button
Turns the alert sound
on
and
off.
11. Mounting foot
12. Locking collar
13. Battery compartment
Cruiser Wireless Controller
