impact BH350 User Manual Download Page 55

Page: 55 / 66

Explorer

Pro

4.11

Menu Lock-Out Protection

Access to the

various menus can be disabled setting the Lockswitch located on the PC board inside the balance to OFF position.

The Lockswitch locks out certain menus when Legal For Trade is turned ON. The default setting for the Lockswitch is OFF.

Procedure

• Turn the display off and unplug the power cord.

• Turn the balance over, make sure the pan does not fall off.

• The Lockswitch can be accessed through the hole nearest

the front panel as shown in the illustration below.

• Remove the plastic cover from the hole nearest the front

panel.

• Select the desired position on the Lockswitch and

reassemble the balance. Use a small screwdriver to reach
the switch.

• Replace the plastic cover in the switch access hole.

• Turn the balance over and plug in the power cord.

Type Approved/Legal for Trade Balance Sealing

All

Explorer

Pro

Balances may be sealed for type approved/

legal for trade applications. Type Approved balances are sealed
as shown in the figures.

For type approved balances consult local Weights and Mea-
sures officials to determine sealing method requirements.

After the balance has been set up properly and LFT is set ON,
proceed to seal the balance as shown below.

LFT Switch Location and Sealing Method

BOTTOM OF BALANCE

LFT SWITCH LOCATION

PLATE

SEALS OVER
PLATE

UNLOCKED/OFF

LOCKED/ON

TOP OF BALANCE PAN
REMOVED

SEAL OVER SCREW

Top Sealing Location and Method

Summary of Contents for BH350



































































Search results

Summary of Contents for BH350

Reviews:

Related manuals for BH350

Brands by name

Popular brands

impact BH350, User Manual

Search results

Summary of Contents for BH350

Reviews:

Related manuals for BH350

Brands by name

Popular brands