impact BH350 User Manual Download Page 34

Page: 34 / 66

Explorer

Pro

3.11

Formulation (Cont.)

Go Back

Help

Enter

On/Off

• Using the arrow buttons, enter the component percentage

for item 1 in the formula.

• Press

Enter

button when desired weight is entered. The

NAME menu appears again. Repeat steps and enter the
component names and percent values for the first formula.

• When all of the entries have been made, select SAVE TO

LIBRARY in the FORMULATION SETUP menu, and then select
RUN, press

Enter

button. The balance displays the first

component of the formula and the required weight.

• Place a container on the pan and tare by pressing

button.

• Add the required amount to the container until the balance

indicates 100% on the bar graph and the proper
percentage.

• Using the arrow buttons and select NEXT shown at the

bottom of the screen and press

Enter

button. The second

component of the formula is displayed. Add the required
weight. Select NEXT and repeat the procedure for all items
in the formula.

• When you have completed weighing all items in the

formula, select NEXT again and a display appears which
indicates the Target Weight, Result and Difference Weight
for the formula. See display below.

FORMULA2 TARGET RESULT DIFF WT
B1 10.0

10.3 0.3

B2 20.0

20.8 0.8

B3 70.0

69.4 -0.6

TOTAL 100.0 100.5

0.5

Procedure
FORMULATIONS BY PERCENTAGE

Formulations can be done by using percentages instead of weight values. See page 21 and repeat procedure up to where screen
choice for WEIGH TYPE is displayed. Then continue as follows:

• Press

arrow button and select WEIGH TYPE.

• Press

Enter

button, a new screen with WEIGHT and

PERCENT is displayed. PERCENT allows components to
be specified by percentage.

• Press

arrow button and select PERCENT.

• Press

Enter

button.

• Using

arrow button, scroll to SET REFERENCE.

• Press

Enter

button. A new screen, ENTER TARGET WEIGHT

appears.

• Using arrow buttons, enter target weight.

• Press

Enter

button, FORMULA SETUP is displayed.

• Using

arrow button, scroll to NUMBER OF ITEMS.

• Press

Enter

button. A new screen, SET ITEM NUMBER

appears.

• Press

arrow button and enter the number of

components in the formula.

• Press

Enter

button, FORMULA SETUP is displayed.

• Press

arrow button and select SETUP.

• Press

Enter

button, NAME menu is displayed with the

number of items you entered for the first formula.

• Press

arrow button and select item 1.

• Press

Enter

button, COMPONENT NAME display appears.

• Using arrow buttons, enter the component name for item 1

in the formula.

• Press

Enter

button, a NAME menu appears with the value

shaded.

• Press

Enter

button, ENTER COMPONENT % menu is

displayed.

Summary of Contents for BH350



































































Search results

Summary of Contents for BH350

Reviews:

Related manuals for BH350

Brands by name

Popular brands

impact BH350, User Manual

Search results

Summary of Contents for BH350

Reviews:

Related manuals for BH350

Brands by name

Popular brands