Thank you for purchasing the
Charger. You get a rapid charger/discharger with a
built-in balance, which is computerized with a high performance microprocessor and specialized operating
software.
Please read this entire operating manual completely and attentively as it contains a wide variety of specific
programming and safety information.
SPECIFICATIONS
Operating voltage range: AC100.0 - 240.0 Volt
Circuit power: Max. charge power 80W
Max. discharge power 10W
Charge current range: 0.1 ~ 10.0A
Discharge current range: 0.1 ~ 2.0A
Current drain for balancing Li-po: 300mAh/cell
Balance precision: ±0.01V
NiCd/NiMH battery cell count: 1-16 Cells
Lithium battery cell count: 1-8 Series
Pb battery voltage: 2-28V
Servo Tester Function: Pulse width 500-2500us
Neutral Pulse width 1500us
USB output: 5V/2.1A
Dimensions: 136 x 145 x 53mm
FEATURES
Optimized operating software
When charging or discharging, it has an “AUTO” function that sets the feeding current automatically.
Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault.
Every program in the unit is controlled with mutual links and communication for every possible error so it
introduces a maximum safety. These can be set at users option.
Servo Test Function
It is built in the functional program of servo test. It can test the swing range, respond speed and neutral
accurately.
USB Output
USB Output is 5V/2.1A. It can charge small batteries, such as phone battery and also can charge the
Spirit 2 controller. It is more convenient and easy to use.
High-power and high-performance circuit
It employs the circuit that has maximum output power of 80W. Furthermore the cooling system is so
efficient that can hold such a power without any trouble of running the CPU or the operating program.
Internal independant lithium battery balancer
It has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging
Lithium batteries for cell voltage balancing.
ENGLISH
2
FRAN
Ç
AIS
