SERVO TEST PROGRAM
This charger has the servo test function. It is more accurate than some other servo testers. It can test the
position/opposition move. Testing and setting the dummy, joggle, neutral of the servo. If it is connected to
the ESC (brushless or brushed), then it can adjust the speed by manual, it is more convenient.
Manual Test
Choose Servo Test window, press
Enter
to enter the testing window, it will show the
manual test program on the left, press
Enter
to enter.
Setting pulse by manual (500-2500us), Analog means that PWM input is 50Hz.
Digial means that PWM input is 100Hz. Press
Enter
to choose these 2 modes.
The input pulse width value adjusted by
INC or DEC
, then the servo will run to the
corresponding site according to the pulse width value which you set. The input pulse
width value adjusted by
INC or DEC
, press
Batt type/Stop
to stop.
Neutral Test
Choose servo test program window, press Enter to enter the testing window. Press
INC or DEC
to choose the Neutral test program. Press Enter to enter and press
Batt
type/Stop
to stop.
After being in the Neutral test, the servo will be in the neutral position. It can judge
the quality according to this operation.
Automatic test
Choose servo test program window, press Enter to enter the window. Press
INC or
DEC
to choose Servo automatic test program, press
Enter
to enter.
Setting pulse by manual (500-2500us), Analog means that PWM input is 50Hz.
Digital means that PWM input is 100Hz. Press
Enter
to choose these 2 modes.
In the automatic mode, pulse of servo will cycle from 500-2500-500. Press
Batt
type/Stop
to stop.
ENGLISH
14
FRAN
Ç
AIS
