a) Servo mount: HS65MG
Using two of the selftapping screws supplied with the HS65MG servo, mount the servo into one
of the GoPro mounting arms, as shown below:
b) Servo Horn
Using the second pair of selftapping screws supplied with the HS65HB servo, screw the servo
horn onto the leftside GoPro mounting plate, as shown below:
c) Right-side GoPro bearing
Take a M3 x 10mm screw, and pass it through the rightside GoPro mounting plate, so that the
head of the screw sits in the milled recess in the plate. Mount the rightside mounting bracket,
