91
INS
TALLER
U
SER
M
AINTEN
AN
CE
TECHNI
CI
AN
TECHNI
CAL
D
AT
A
ZONE
Menu item
Description
Zone 1
Defines the operating parameters to manage zone 1 (or the entire system if single-zone).
Zone 2 (*)
Defines the operating parameters to manage the zone 2 (if present).
Zone 3 (*)
Defines the operating parameters to manage the zone 3 (if present).
(*) if present.
The following tables will appear the same also for any Zone 2 and Zone 3.
ZONES/Zone 1
Menu item
Description
Information
This displays the system operating data
Settings
Defines the operating parameters to manage zone 1
Definition
Defines any further operating parameters to manage zone 1
ZONES/Zone 1/Information
Menu item
Description
Range
Room temperature (***) Room temperature read on zone 1
0°C ÷ 50°C
Room Set (**) (***)
Room temperature set on zone 1
5°C ÷ 35°C
Working mode status
Mode set on zone 1
OFF / A-ECO / A-COMF / MAN
Room thermostat status Status of the room thermostat on zone 1
Open / Close
Set CH
This displays the zone 1 flow set
25°C ÷ 85°C
Plant
Information related to the type and presence or absence of a room probe
Zone 1 Information Menu is always present regardless of whether or not a CAR
V2
is connected.
(**) not displayed when the “Req. with room probe” is set to NO
(***) displayed when the zone of interest is associated with a room probe (RF probe,...)
ZONES/Zone 1/Information/Plant
Menu item
Description
Range
Room probe
This displays or not the presence of the room probe
OFF = No probe
WIRED = Not used
RF = Probe present
OT = CAR V2 presence
Water circuit
If zone board is present, it informs about the type of system in use in the
zone.
DIR = Direct circuit
MIX = Mixed circuit
CH temperature
Zone board absent: the temperature read is the one to the boiler outlet
0°C ÷ 99°C
Zones control unit p request for information relating to the mixed
zone