32
7.4 Configuration of Measure Mode
In
"Probe List"
with
"Config"
and
"Measure Mode & Parameters”
the SONO probe can be adjusted to the desired
measure mode CA, CF, CS, CK, CC or CH (see Chapter “Configuration Measure Mode).
By selecting the operating mode, the SONO probe can be set up to different measurement modes, e.g. for
averaging values from several single measurement values, for performing a filtering or performing other functions
(see chapter
"Measurement mode configuration"
in this manual).
Furthermore, a SONO probe can be set to a special required precision of the single value measurement with
"Single Precise Parameters"
. It is about settings, how the TDR radar pulse is executed and evaluated during one
measurement cycle.
The next chapter describes how this can be done.
