During the reference move,
CM-150
will be indi-
cated, and then the previous operating mode will
be continued.
To reset all settings of the WASH-400LED to
the factory settings (
values in bold in chap-
ter 10.2):
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
to select the menu item
PRO defaults
and press the button ENTER
to call up this menu item.
No
will be indicated.
3) Use the button
or
to go to
Yes
.
4) Press the button ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
Any setting changed will not take effect before the
menu has been exited.
9.11 Indicating the internal temperature
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
to select the menu item
Temp.
and press the button ENTER to call up
this menu item. The internal temperature of the
unit will be indicated.
3) To return to the main menu, press the button
MENU or ENTER.
4) To exit the menu, keep the button MENU
pressed for more than one second.
9.12 Indicating the operating time
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
to select the menu item
Fixture Time
and press the button ENTER
to call up this menu item. The operating time of
the unit will be indicated.
3) To return to the main menu, press the button
MENU or ENTER.
4) To exit the menu, keep the button MENU
pressed for more than one second.
9.13 Indicating the firmware version
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
to select the menu item
Firmware Version
and press the button
ENTER to call up this menu item. The firmware
version (operating system of the unit) will be
indicated.
3) Use the button
or
to switch over between
various details.
4) To return to the main menu, press the button
MENU or ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
9.14 Readjusting the moving head position
To position the moving head, a fine adjustment is
possible:
1) In DMX mode, set the moving head to a position
ideal for adjustment.
2) Press the button menu to call up the setting
menu.
3) Keep the button ENTER pressed for more than
3 seconds.
Pan Offset
will be indicated.
4) To readjust the pan angle, press the button
ENTER. Use the button
or
to readjust the
position (
-127
to
127
). Then press the button
ENTER.
5) To readjust the tilt angle, use the button
or
to go to
Tilt Offset
and press the button
ENTER. Use the button
or
to readjust the
position (
-127
to
127
). Then press the button
ENTER.
6) To return to the main menu, press the button
MENU.
7) To exit the menu, keep the button MENU
pressed for more than one second.
10 Specifications
Data protocol: . . . . . . . . . DMX 512
Number of
DMX channels: . . . . . . . . selectable: 1, 9, 12, 14,
16 or 28
Light source: . . . . . . . . . . 7 × 10 W RGBW LED
(Cree)
Illuminance at a
distance of 1 m: . . . . . . . 55 000 lx
Beam angle: . . . . . . . . . . 12°
Power supply: . . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . 130 VA max.
Amblent temperature: . . . 0 – 40 °C
Dimensions: . . . . . . . . . . 260 × 300 × 160 mm
Weight: . . . . . . . . . . . . . . 5.8 kg
Subject to technical modification.
23
GB