IMG STAGE LINE LSE-10RG, Instruction Manual

Page: 7 / 29

All operating elements and connections
described can be found on the fold-out
page 3.
1 Operating Elements
and Connections
1 Locking screw (2 ×) for the mounting
bracket
2 Microphone for music control
3 Laser beam outlet
4 Desk stand
5 Mounting bracket
6 Control “Motor Controller” for the rotat-
ing speed of the laser dots
7 Button to activate and deactivate the
music control via the microphone (2)
8 Fan
9 Control “Strobeflash Controller” for the
flash frequency
10 Sliding switch to activate and deactivate
the laser effect unit and the flash feature
11 Jack DC 5 V for the power supply unit
provided
2 Safety Notes
The units (laser effect unit and power sup-
ply unit) correspond to all relevant direc-
tives of the EU and are therefore marked
with
.
2.1 Special notes for laser units
This unit is a class 2M laser product. The
lasers have the following power and wave-
length:
2.2 General safety notes
Please observe the following items in any
case:
G
The units are suitable for indoor use only.
Protect them against dripping water and
splash water, high air humidity and heat
(admissible ambient temperature range
0 – 40 °C).
G
Do not operate the laser unit and immedi-
ately disconnect the power supply unit
from the socket
1. if the laser unit or the power supply unit
is visibly damaged,
WARNING The power supply unit uses
dangerous mains voltage.
Leave servicing to skilled
personnel only. Inexpert han-
dling or modification of the
unit may result in electric
shock.
WARNING In case of temporary expo-
sure (0.25 seconds max.), a
class 2M laser is safe for the
naked eye. However, it is
hazardous when viewed
through optical instruments.
In this case, the laser may
cause permanent retinal
damage.
Power Wavelength
green laser 30 mW 532 nm
red laser 60 mW 650 nm
7
GB