E170301x.03_EN
29/06/2022
5
The machine must always and only be used by professionally trained personnel and in the presence of at least
one other operator!
READ CAREFULLY AND INFORM ALL OPERATORS ABOUT INTERVENTION SYSTEMS IN CASE OF
SUDDEN POWERFAILURE.
DANGER OF ELECTROCUTION
Any intervention on the electrical parts of the machine must be carried out only by qualified personnel and after
removing the power supply to the machine.
The power and control circuits can only be tampered with by the manufacturer's staff, under penalty of
forfeiture of the warranty conditions.
On the electrical panel there is the following monitor plate that must be replaced with an identical one in case it
has been damaged or removed.
It should be noted that, with reference to electrical hazards, the machine has been designed by the regulations
and
described in the certificate of conformity delivered with the machine.
ATTENTION!
ATTENTION! Even when the position of the main switch is "0", the cables upstream of the switch are in
voltage!
PSYCHOPHYSICAL CONDITION OF THE OPERATOR
The operators involved in the machinery must
be in
perfect psychophysical condition; during the work, the
vertical posture must be assumed in front of the machine. Abrupt movements or uncontrolled gestures must be
avoided, for example during the picking and insertion of the fabrics to be
ironed to
avoid dangerous collisions
with the machine frame.
If other operators or other personnel are present, these must not be a source of distraction for the operator in
charge of the machine.
During the use of the machine, the operator must not be distracted by televisions, radios, etc. nor be subject to
any other source of distraction.
LIGHTING
In the room where the machine is installed, there must be uniform illumination of intensity 300-500 lux,
annoying glare must also be avoided.
ATTENTION!
In the case of gas Ironer, the flue gases must be evacuated according to the regulations in force on the subject.
DANGER OF CRUSHING
