E170301x.03_EN
29/06/2022
18
13.
GAS CONNECTION: TESTING
As soon as the connection work is completed, the appliance and the entire installation must be checked. In particular,
check:
-
that the connections are made by the requirements and indications of this manual.
-
that all the safety requirements of the standards, laws and directives in force are met.
-
that the gas connections made are watertight.
The equipment is then switched on according to the instructions in the user manual, checking the progressive ignition of
the burners and the appearance of the flame.
Carry out a control of gas consumption by the volumetric method. Detecting through the meter how much gas has been
consumed in a given unit of time: the resulting value is to be compared with the values shown in the table.
14.
GETTING TO KNOW THE DRYING GRILLE
The drying grille is characterized by some elements that it is better to know at once, before starting to use the machine.
With point 1 the access door to the electrical panel of the grille is found. The flap can be opened using the plastic key
that is delivered with the machine documentation. Access to the electrical panel must be allowed only to specialized and
competent personnel.
With point 2 the main switch is found: when you operate it bringing it to the "I" position, you power the machine
electrically.
Point 3 finds the control microprocessor of the grille.
Point 4 shows the emergency mushrooms that must be pressed whenever it is necessary to stop the Ironer roller quickly.
Step 5 finds the hand save bar: when pressed, the machine stops.
15.
WORK CYCLE
During operation it must be remembered to use the entire length of the roller, so as to keep uniform temperature over
the entire length of the machine.
The temperature to be used must follow the temperatures allowed by the characteristic plates of the fabrics to be ironed.
Also remember that the conditions of residual moisture of the fabrics to be dried and ironed should not be more than
50%. The drying Ironer must therefore be used on fabrics that have been centrifuged with a high centrifugation G-factor
washing machine ≥ 300. Its purpose is to dry and simultaneously iron the flat garments.
The productivity values detectable by the technical data sheets are recorded according to ISO 9398.
