IMER INTERNATIONAL S.p.A
3
Dear Customer,
Congratulations on your choice of purchase: IMER sawing
machines are the result of years of experience and are
equipped with all the latest technical innovations.
- WORKING IN SAFETY
To work in complete safety, read the following
instructions carefully.
This OPERATION AND MAINTENANCE manual must be kept
by the SITE MANAGER and be always available for
consultation.
The manual should be considered as a part of the machine
and must be kept for future reference, for the whole life of the
machine. Should the manual be lost or damaged, a
replacement copy can be ordered from the manufacturer.
The manual contains important information regarding site
preparation,
installation,
machine
use,
maintenance
procedures, and requests for spare parts. Nevertheless, the
installer and the operator must both have adequate experience
and knowledge of the machine prior to use.
In order to ensure operator safety, safe operation and long
service life, it is imperative to adhere to the instructions set out
herein and the requirements of the legislation in force
governing safety in the workplace. Use individual safety
equipment (suitable shoes and clothing, gloves, safety
glasses, etc.).
- It is mandatory to wear protective goggles.
- It is mandatory to use individual hearing protectors.
- Make sure that all signs are legible.
- It is strictly forbidden to carry out any form of
modification to the machine structure and systems.
IMER INTERNATIONAL accepts no responsibility in the event
of failure to comply with laws governing the use of this type of
equipment, with particular reference to: improper use, power
supply errors, lack of maintenance, unauthorised modification,
and failure to comply, either wholly or partially, with the
instructions set out in this manual.
IMER INTERNATIONAL reserves the right to modify features
of the saw and/or the contents of this manual, without the
obligation to update previous machines and/or manuals.
1
TECHNICAL DATA
Technical data are stated in Tab 2 and the electrical
specifications in Tab 3.
- TECHNICAL DATA
Model
Masonry 750 Plus
Max disc diameter
750 mm
Disc hole
25.4 mm
Disc revs (230V/50Hz)
976 rpm
Disc revs (400V/50Hz)
1440 rpm
Disc revs (400V/60Hz)
1475 rpm
Disc revs (220V/60Hz) SPH
1180 rpm
Disc revs (220V/60Hz) TPH
1475 rpm
Disc rotation direction
(view from the movable disc
guard)
clockwise
Cutting table dimensions
490x660 mm
Overall dimensions
(width x length x height)
850x1550x1600 mm
Overall dimensions for
transport
(width x length x height)
850x1550x1600 mm
Weight of saw in operation
285 kg
Weight for transport
202 kg
Table 2
Electrical
features
Motor
(230V/
50Hz)
Motor
(400V/50
Hz))
Motor
(400V -
60Hz)
Motor
(220 V -
60 Hz)
SPH
Motor (220
V - 60 Hz)
SPH
Power (kW)
2.2
5.5
5.5
4.0
5.5
Rated voltage
(V)
220-
240
400
400
220
220
Frequency
(Hz)
50
50
60
60
60
Absorbed
current (A)
13.8
11.6
11.5
23.2
21.6
Rpm
1420
1440
1740
1740
1730
Type of
service
S1
S3
S3
S1
S1
Insulation
class
F
F
F
f
F
Protection
class
IP55
IP55
IP55
IP 55
IP55
Capacitor
(µF)
2 x 50
180
Table 3
2
. NOISE LEVEL AND VIBRATIONS
Tab 4 gives the sound pressure level of the machine
measured at the ear of the operator when running empty
(LPA) and vibrations transmitted when it is operating.
Model
Type of
motor
L
pA
A
eq
Masonry 750 Plus
Electric
95 dB
2.33 m/s
2
Table 4
3
CUTTING SPECIFICATIONS
The sawing machine is designed to cut only bricks, ceramics,
marble, granite, concrete products and similar items. The
machine must be used ONLY with segmented or continuous
rim diamond cutting blades, which must be water-cooled at all
times. The use of blades for dry cutting is strictly forbidden and
the machine must not be used to cut any material other than
those included in this specification. IMER INTERNATIONAL
accepts no responsibility for loss or damage resulting from
improper use of the machine.
