IMEON ENERGY 3.6, Installation Manual, Page: 58 / 188

IMEON INVERTER
58
IMEON_installation_guide_rev.D.6
FR
FR
EN
ES
IT
1. Drill six holes in the marked locations for the six screws.
IMEON 3.6 IMEON 9.12
2. Place the wall plate against the surface and fix it with the appropriate screws
3. Fit and fix with screws the IMEON on the wall plate and verify that the inverter is fixed securely.
3.3 Electrical connection
WARNING: To prevent any risk of electric shock, make sure that the ground cable is correctly
connected to the earth ground before switching on and using the inverter.
Source Designation Connector
Suggestion of cable
for IMEON 3.6
Suggestion of cable
for IMEON 9.12
PV
PV1 + + (type MC4)
6mm² stranded cable
4mm² solid cable
6mm² stranded cable
6mm² solid cable
PV1 - - (type MC4)
PV2 + + (type MC4)
PV2 - - (type MC4)
4mm² stranded cable
Grid
Earth
/ PE (type RST)
4mm² stranded cable
N N (type RST)
L1 1/L1 (type RST)
L2 2 (type RST)
L3 3 (type RST)
Battery
BAT + POS +
33mm² stranded cable 95mm² stranded cable
BAT - NEG -
AC BACKUP
Earth
/ PE (type RST)
2,5 mm² stranded cable
1,5 mm² stranded
cable
N N (type RST)
L1 1/ L (type RST)
L2 2 (type RST)
L3 3 (type RST)
Earth Earth Earth
6mm² stranded cable
4mm² solid cable
6mm² stranded cable
4mm² solid cable
WARNING: These values are provided solely for guidance. It is necessary to calculate again
the cable cross section, according to the current and to the cable length.