IMC Networks IE-MiniFiberLinX-II Operation Manual Download Page 7 | Manualshive

Page: 7 / 48

background image

4

LED Operation

The IE-MiniFiberLinX-II features two diagnostic LEDs:

FX LNK/ACT

This LED is on when a FX Link exists and blinks when data passes
through the fiber connection.

TX LNK/ACT

This LED is on when a TX Link exists and blinks when data passes
through the twisted-pair connection.

Powering Options

The IE-MiniFiberLinX-II powering options include AC and DC power as well as Power
over Ethernet, functioning as a PD compliant with 802.3af. The DC Terminal block
allows you to daisy-chain one IE-MiniFiberLinX-II to another. To use the DC terminal
block, connect to any one positive and any one negative terminal from a power
source. The illustration shows the wiring configurations for the DC terminal block (12
to 48 VDC).

Non-Telco Version

Telco Version

NOTE

For Telco Only: It does not matter which terminal is referenced (connected to) earth-
ground. For example, when using a -48 VDC supply in which the positive rail is
connected to earth-ground, simply connect this side to a terminal block “+” terminal
and the -48 VDC side to the negative terminals.

+5 to 24 VDC

12 to 48 VDC

7 to 50 VDC

+5 to 24 VDC

«
...
5
6
7
8
9
...
»

Summary of Contents for IE-MiniFiberLinX-II

















































Reviews:

No comments

Related manuals for IE-MiniFiberLinX-II

Brand: La Marche Pages: 21

Brand: Hama Pages: 9

Brand: Hama Pages: 10

Brand: Hama Pages: 12

Brand: Yosin Pages: 17

Brand: Humandata Pages: 10

Brand: Xuum Pages: 24

Slimline Plus 1250

Brand: Wagan Pages: 32

Brand: HEIDENHAIN Pages: 44

SO SPEAKY HDMI+ SK5

Brand: DANE-ELEC Pages: 16

Brand: Hall Research Technologies Pages: 8

Brand: Sinexcel Pages: 49

Brand: Manhattan Pages: 2

GX200 II Series

Brand: Redgum Pages: 20

Brand: R3Di Pages: 10

Brand: Prism Sound Pages: 63

Brand: Black Iris For Telecom & Technology Pages: 14

IFS MC250-4T Series

Brand: Interlogix Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands