General Operation
16
VTM-2000 Installation and Operation Handbook
Navigating the Pane Setup Menu
NOTE
: A function button can be pressed to exit from the pane menu. If a different function than the
displayed function is pressed, the highlighted pane will change to the selected function pane.
Use the NAVIGATION buttons or the SETUP POSITION knobs to navigate the Pane menu. The
SETUP POSITION knobs and Navigation buttons are described below:
Press to exit the menu. Press to exit the submenu.
Press to select a menu item or open a menu or submenu.
Press to move up in the menu or submenu.
Press to move down in the menu or submenu.
Rotate the knob to move the menu cursor up and down or to change a
value or condition in a menu.
Rotate the knob to enter or exit the submenus.
Rotate the knob to move the menu cursor up and down or to change a
value or condition in a menu.
Reference
1.
Press and hold an input button to display and change the Internal or External
reference selection. The default reference selection is Internal. To change the
reference selection:
2.
Press and hold the INPUT button to access the Reference pane menu.
Table 3-3
shows the Reference menu selections.
3.
When REFERENCE is highlighted, press the SETUP/ENTER button (or rotate the
RIGHT/LEFT NAVIGATION knob) to open the menu selections.
4.
Press the UP or DOWN button (or rotate the UP/DOWN NAVIGATION knob) to select
the reference, and press the SETUP/ENTER button.
