Imagine Selenio 6800 HUC6801+D, Installation And Operation Manual

Page: 39 / 62

27
Copyright © 2010, Harris Corporation
4
Parameters, LEDs, and Alarms
HUC6801
+
D Control Parameters
Table 4-1 , Table 4-2 , and Table 4-3 , list all of the available parameters and options for the
HUC6801
+
D module. The parameters are listed in the order that they appear in CCS Pilot
and Navigator. If you are using
+
Pilot Lite, some parameters in the list may not appear in the
order as they appear in the software.
Parameter
Table Notes
When viewing the control parameter tables, observe the following:
„
Shaded table rows indicate read-only (feedback) parameters.
„
Bolded parameter options indicate the default settings for the parameter.
„
The bank selection and rotary switch combinations for each parameter and parameter
option are listed in the tables under the
Bank, Switch heading. For information about
navigating through the parameter list using the card-edge controls, see page 12.
„
Table 4-1 on page 28 lists HUC6801
+
D video setup parameters
„
Table 4-2 on page 33 lists HUC6801
+
D audio setup parameters
„
Table 4-3 on page 37 lists HUC6801
+
D other parameters
On Screen
Display
Monitoring
If you are using card-edge controls to configure your HUC6801
+
module, you can use the
OSD Monitoring feature to view the current parameter selections. When the On-Screen
Display parameter is turned on, the current parameter selections are displayed on module’s
monitoring outputs. For information on enabling OSD Monitoring, see Enabling
On-Screen Display on page 13.